Walnut tone – is definitely one of the favorite oilwax tones of Woodengold’s customers. The tone of the walnut adds dignity to the interior and at the same time brings out the special beauty of oak wood grain very well. The top oil layer coating is very abrasion-resistant hardwaxoil.
| Code: 1LP5 | Thickness: 12/ 15 /16 / 21mm |
| Finishing: oiled/unfinished/brushed/smooth | Withts: 120/140/160/180/200/220/240/260/280/300mm |
| Underfloor heating: suits well | Lenghts: 600-3000, 1000, 1200,1000-1400, 1600-2200, 2200-2400mm |
| Construction: 2-or 3-layer | Gradings: Select-Prime/ Natur/ Classic / Country |
| Installation method: glued to underfloor, 3-layer is possible to install as a floating floor | Bevels: 4 sides, none |
| Suitable glues: Stauf, Wakol | Suitable underfloors: concrete, plaster, OSB, plywood, wood |
Construction description: 1LP5 parquet is available in 2 or 3 layers. 2-layer means that the top layer is made of oak and the bottom of moisture-resistant plywood. 3-layer means that the top layer is made of oak, – the middle layer of moisture-resistant plywood – and the bottom layer is also made of oak. Also in production 3-layer: top layer of oak, middle and bottom of pine / birch.3-layer parquet is very stable, being able to remain stable even with larger fluctuations in temperature and humidity. Stability advantage compared to 2-layer up to 15%!
Permitted tolerance on boards: length + -2 (mm), width + – 0.3 mm, thickness + – 0.3 (mm)
x
Sisesta andmed. Võtame sinuga ühendust esimesel võimalusel.
Estonian
Danish
Dutch
English
Finnish
French
German
Italian
Latvian
Lithuanian
Luxembourgish
Norwegian
Polish
Portuguese
Russian
Swedish